DIY Tile & Grout Sealant is a water-based sealer designed for grout, porous tile, concrete, natural stone, brick and many other porous masonry surfaces. DIY Tile & Grout Sealant protects against both water and oil based stains. DIY Tile & Grout Sealant provides this amazing protection without gloss or color enhancement, thus preserving the natural look of the tile and grout.
Directions: Prior to application make sure surface is clean, dry and free of any coatings or waxes. Always test for compatibility in a small inconspicuous area. Allow new grout 72 hours to cure before applying DIY Tile & Grout Sealant.
DIY Tile & Grout Sealant may be applied with any of the following: DIY Tile & Grout Sealant applicator, airless sprayer, paint roller, clean mop, lambs wool or micro fiber applicator. Apply DIY Tile & Grout Sealant liberally over grout and porous tile, using above mentioned applicators. Wipe up any excess sealer off of non-porous tile or other surfaces using a clean, lint free rag. Allow first coat to dry for 20-30 minutes. Apply a second coat of DIY Tile & Grout Sealant for maximum results. Floors may be open to traffic in 4 to 6 hours. Depending on porosity of the tile, grout and masonry coverage will be approximately 250 sq ft per quart.
CAUTION: Keep out of reach of children. Eye contact: Flush thoroughly with large amounts of water. If irritation persists, call a physician. Skin irritation: wash skin thoroughly with mild soap and water. Remove contaminated clothing. Ingestion: Do not induce vomiting. Consult a physician immediately.